Sign Stand Base, Raw Wood Ready For You to Paint Any Color. Holds 3/16" Foam Board and up to 1/4" AcrylicSale
This stand comes in raw wood and you will have to prime and paint. You will assemble and make sure the a piece of 1/8. acrylic will fit in the slots with out binding. You will need to twist the dowels to align the slots perfectly before painting. The sign will hold up to 1/4" acrylic sign up to 36" tall. You can see from our images the 36" sign will bow back just a bit, but there are ways to correct that with a little ingenuity.
The dowel post have thumb screws to close the gap on thinner material like 1/8" acrylic.
Short Stand has 16" tall dowels.
Tall Stand has 32" tall dowels
The sign slot is 3.5" deep and exactly .25" thick.
The slot will hold:
✅ 1/8" Acrylic
✅ 3/16" Foam Board
✅ 1/4" Acrylic
▪️ Dowels are 11" apart on center.
▪️ The dowel post have thumb screws to close the gap on thinner material like 1/8" acrylic.
▪️ Base is 12" x 20" and made from 3/4" thick MDF.
⚠️ You must paint, item ships as raw wood.
⚠️ You will need to use wood glue to set dowels into base.
Email or text us if you need printed signage